HARVARD高压注射泵

Harvard Apparatus的高压注射泵以其品种多、精度高和出色的可靠性而享誉世界．由于HARVARD高压注射泵的型号及附件众多，若要进一步了解HARVARD高压注射泵的相关产品信息，请与香港友诚生物科技有限公司联系。

HARVARD高压注射泵特性：

－－大注射能力 – 用四个200 ml注射器可以达到800 ml。
－－超高注射压力 – 可以提供超过400 lbs的输送推力。
－－± 0.5% 的稳定精度
－－± 0.1% 的可重复性精度
－－可编程操作 – 具有通过键盘进行编程的先进特性
－－经久耐用 - 结实的结构可保证终生工作稳定
－－只能使用Harvard的不锈钢注射器

High Capacity

This NEW PHD 22/2000 Hpsi Syringe Pump provides the highest capacity output of all of Harvard Apparatus’ microprocessor syringe pumps. This pump can hold up to four syringes from 20 to 200 ml. By combining the output from four 200 ml syringes, this pump is able to infuse up to 800 ml of fluid without refilling.

Ultra High Pressure

This NEW PHD 22/2000 Hpsi Syringe Pump over 400 pounds of force against the syringe plungers, higher than any other pump we manufacture. For applications with viscous fluids or requiring high pressure, this is the pump to handle the job.

Versatility

This Programmable PHD 22/2000 Hpsi syringe pump provides advanced capabilities directly from the keypad. No external computer is required. The pump can store up to four programs of 10 sequences each. Programs are stored in non-volatile memory. No other pump can provide this level of control and flexibility with the accuracy of the PHD 22/2000 syringe pump series. Like all of Harvard Apparatus’ other pumps, this new high capacity pump is easy to use.

Built-to-Last

This pump uses high quality, industrial grade components that will deliver years of smooth operation.

To Accommodate Almost Every Workbench

This pump is provided with a standard 5 foot cable that connects the control box to the pumping mechanism box. If additional distance is required between the controller and pump, a 30 foot remote extension cable is offered as an accessory.

Stainless Steel Syringes

Only Harvard Apparatus’ stainless steel syringes can be used with this pump. They can withstand high pressure applications and provide years of service

技术参数
类型	微处理器驱动型注射泵
稳定精度	± 0.5%
复现精度	± 0.1%
注射器(最小/最大)	可以使用20到200 ml的不锈钢注射器
流速：
最小	1.5 μl / hr
最大	112 ml / min
非易失性存储器	存储所有设置
RS – 232	RJ11 - 4插头
TTL	9 - 针D - Sub. 插头
平均直线推力	433 lbs
驱动电机	1.8 ˚ 步进电机，变速比1:10
电机驱动控制	从1/2到1/32 微步步进可以进行微处理器控制
导向螺杆每转一圈电机前机步数	从8000到128000
步速：
最小	27.3秒/步
最大	416.7微秒/步
推进器移动速度：
最小	0.09 μm / min
最大	71.210 mm / min
功率	65 W, 0.5A保险丝
电压范围	95到130V交流, 60Hz, 220到260V交流, 50Hz, 可选
电缆长度	约152 cm (60 in)
尺寸, 高x 宽x 长
控制盒	9.5 x 27.9 x 22.9 cm (3.75 x 11 x 9 in)
注射器托架	22.9 x 43.2 x 30.5 cm (9 x 17 x 12 in)